INFO

SIP Provider sipcall (CH) (kb5188)

The information in this article applies to:

  • SwyxWare 11

[ Summary | Information | Links ]


Summary

Information und configuration hints for SIP provider sipcall (Switzerland)


Information

General information

The SIP Trunk from sipcall was first tested and released with SwyxWare 11.32.0.0.

The SIP Trunk from sipcall is a SIP Trunk with user authentication, i.e. you receive information on user ID, user name and password. The names may differ, or you may only receive a name or ID with password. In this case the user ID is identical to the user name when configuring the SIP trunk in SwyxWare.

Plattforms

SwyxWare: The SIP Trunk from sipcall can be used from SwyxWare 11.32.0.0 on. When using an earlier version of SwyxWare incompatibilities cannot be excluded and use is at your own risk.

SwyxON: The SIP Trunk from sipcall is suitable for central connection in the data center.

Configuration

When creating the SIP trunk group, select the profile 'sipcall (CH)'. If the profile is not included in the corresponding list, you can download the required CustomProviderProfiles.config for SwyxWare at the end of this article. For more information about using this file, see Configuration and Adaptation of SIP Providers via Provider Profiles (kb3436).

 
In the codec dialog G.722 can be deselected as supported codec. T.38 has to be deselected as supported codec.
 
Tested Features
  • Incoming/outgoing national /international calls
  • Correct Calling Line Identification (CLI) on national / intenational calls
  • CLIP No Screening national
  • Holding and retrieving calls
  • Toggeling between two calls
  • Call transfer
  • Call forwarding
  • Conferencing
  • Mutually supported codecs:
    • G.711a
    • G.711u
    • G.729
  • Incoming/outgoing DTMF signaling in accordance with via RFC2833
  • FAX transmission via G.711

Restrictions:

  • FAX transmission via T.38 is not supported
  • Number suppression for outgoing calls (CLIR) is not possible

Test date
10/11/2018 with SwyxWare 11.32.0.0

Overview of tested SIP provider


Links

As far as software supplied or used by us, includes open source elements the additional terms under https://www.swyx.com/open-source apply in addition. An overview which products from the Swyx portfolio include open source elements and which open source license is relevant can be found under https://www.swyx.com/open-source.

The third-party contact information included in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Swyx in no way guarantees the accuracy of this third-party contact information nor is responsible for it's content.


Comment

Comment on this article



If we have any follow-up questions, where can we contact you?

E-Mail Address (optional)


Note

This feedback form can't be used for support requests. Those requests must be directed to your Swyx reseller or distributor.