SIP Provider TNG (DE) (kb5168)
The information in this article applies to:
- SwyxWare 11.00
[ Summary | Information | Links ]
Summary
Summary
Information und configuration hints for SIP provider TNG (Germany)
Information
Information
General information
The SIP Trunk from TNG was first tested and released with SwyxWare 11.31.0.0.
The SIP Trunk from TNG is a SIP Trunk with user authentication, i.e. you receive information on user ID, user name and password. The names may differ, or you may only receive a name or ID with password. In this case the user ID is identical to the user name when configuring the SIP trunk in SwyxWare.
Plattforms
SwyxWare: The SIP Trunk from TNG can be used from SwyxWare 11.31.0.0 on. When using an earlier version of SwyxWare incompatibilities cannot be excluded and use is at your own risk.
SwyxON: The SIP Trunk from TNG is suitable for central connection in the data center.
Configuration
When creating the SIP trunk group, select the profile 'TNG (DE)'. If the profile is not included in the corresponding list, you can download the required CustomProviderProfiles.config for SwyxWare at the end of this article. For more information about using this file, see Configuration and Adaptation of SIP Providers via Provider Profiles (kb3436).
After creating the trunk group, in the property settings of the trunk group, on tab 'Profile', it is necessary to to add special number replacement rules. The following rules need to be added for inbound, calling party:
00* -> +*
+* -> +*
0* -> +[cc]*
* -> +[cc][ac]*
FAX transmission: For FAX transmission it is necessary to select the option "Remove T.38 from first negotiation (SIP INVITE)" via the tab "Codecs/Channels" of the properties of the created SIP trunk.
Tested Features
- Incoming/outgoing national calls
- Correct Calling Line Identification (CLI) on national and calls
- Holding and retrieving calls
- Toggeling between two calls
- Call transfer
- Conferencing
-
Mutually supported codecs:
- G.722
- G.711a
- G.711u
- G.729
- Incoming/outgoing DTMF signaling in accordance with via RFC2833
- FAX transmission via T.38
Restrictions:
None
Test date
04/10/2018 with SwyxWare 11.31.0.0
Overview of tested SIP provider
References
Links
- CustomProviderProfiles_TNG(DE).zip
kb5168_CustomProviderProfiles_TNG(DE).zip
The third-party contact information included in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Swyx in no way guarantees the accuracy of this third-party contact information nor is responsible for it's content.