New Firmware for SwyxPhone L6x Series available (V1 R1.13.0) (kb5049)
The information in this article applies to:
- SwyxWare 188.8.131.52
- SwyxWare 11.00.1.0
- SwyxPhone L66
- SwyxPhone L64
- SwyxPhone L62
- SwyxWare 11.00
- SwyxWare 11
Swyx has released firmware V1 R1.13.0 for the SwyxPhone L6x series.
Please note that this firmware can only be used with a SwyxWare 11 or newer.
This version enables the use of the colored LEDs of the SwyxPhone L6x series. The layout for the LEDs can be found in the manual on the current DVD release.
To update the firmware at your SwyxServer you have to perform the following steps related to the installed SwyxWare version:
Open the Server Settings within the SwyxWare Administration and select the tab "SwyxPhone Firmware Update". Within this configuration select the option "Get". Hereby the SwyxServer will contact the Swyx FTP server (ftp.swyx.com) which is configured by default and downloads the latest firmware version.To update the firmware at your SwyxServer you have to perform the following steps related to the installed SwyxWare version:
After this you could validate that the new firmware was download by checking the firmware version information:
If the firmware version (V1 R1.13.0) is listed for all SwyxPhones L6x, the phones of this type will prompt for a firmware upgrade the next time the user logs on.