INFO

SIP Provider XPirio (AT) (kb4436)

The information in this article applies to:

  • SwyxWare 2011 R2

[ Summary | Information | Links ]


Summary

Information und configuration hints for SIP provider XPirio (Austria).


Information

General information

XPirio is offering a SIP trunk with user authentication. You have received information about UserID, UserName and UserPassword, whereas the naming may differ, or you might have only received UserName and -password. In this case, UserID and UserName are identical. Besides, the public IP address is also being used for authentication. Therefore, you need a static, public IP address from your ISP assigned to the SwyxWare server.


Configuration

In order to assign incoming calls to the correct trunk, it is necessary to configure a SIP URI for the trunk. The assigned number block and the numberformat must be considered.
Example
Numberblock: +43 662 1234560 ... +43 662 1234569
In this case, the SIP URI must be entered in the format 0662123456*@*.

On outgoing calls XPirio changes some characteristica of the RTP stream call setup and call answering. This may lead to a oneway voicechannel if internal encryption is active. Therefore, in the tab "Encryption" of the SwyxServer properties, you have to deactivate internal encryption.

Exclude G.722 in the Codecs/Channel tab of the Trunk Properties dialog.

For your convenience the generated CustomProviderProfiles.config is available for download at the end of this article. Extended information about how to use this file can be found at HOWTO: Configuration and Adaptation of SIP Providers via Provider Profiles (kb3436).

Tested Features

  • Incoming/outgoing national calls
  • Incoming/outgoing international calls
  • Correct Calling Line Identificaion (CLI) on national and international calls
  • Holding and retrieving calls
  • Toggeling between two calls
  • Call transfer
  • Conferencing
  • Mutually supported codecs:
    • G.711a
    • G.711µ
    • G.729
    • T.38 for FAX transmission
  • Incoming/outgoing DTMF signaling in accordance with via RFC2833
  • T.38 negotiation and FAX transmission.

Links

As far as software supplied or used by us, includes open source elements the additional terms under https://www.swyx.com/open-source apply in addition. An overview which products from the Swyx portfolio include open source elements and which open source license is relevant can be found under https://www.swyx.com/open-source.

The third-party contact information included in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Swyx in no way guarantees the accuracy of this third-party contact information nor is responsible for it's content.


Comment

Comment on this article



If we have any follow-up questions, where can we contact you?

E-Mail Address (optional)


Note

This feedback form can't be used for support requests. Those requests must be directed to your Swyx reseller or distributor.