SwyxPhone S315 Firmware v6.06 (kb3758)

The information in this article applies to:

  • SwyxWare v6.12
  • SwyxPhone S315

[ Summary | Information | Links ]


This article describes all solved problems with the SwyxPhone S315 Firmware v6.06.

Please note that this firmware version requires SwyxWare v6.12.


Following new functions are included in this firmware:

  • Dialer Mode - Initiate new calls at the S315 via SwyxIt! running in dialer mode

List of most important solved problems:

  • Swyx00018990
    S315 shows itself as busy if peer was placed on hold and disconnected during that
  • Swyx00019029
    Alerting tone in handset, if call notification is received during a call was put on hold
  • Swyx00018984
    Notification calls will always be signalled, even if the user is currently navigating through phonemenues or configuring
  • Swyx00018991
    S315 crashes pickung up a call within a very special scenario with group calls and intercom calls
  • Swyx00019158
    Wrong tone (busy tone) played via handset in case user gets notification call and wants to initate a new call
  • Swyx00019057
    Phone application gets frozen after some time of unsuccessful registration


As far as software supplied or used by us, includes open source elements the additional terms under apply in addition. An overview which products from the Swyx portfolio include open source elements and which open source license is relevant can be found under

The third-party contact information included in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Swyx in no way guarantees the accuracy of this third-party contact information nor is responsible for it's content.


Comment on this article

If we have any follow-up questions, where can we contact you?

E-Mail Address (optional)


This feedback form can't be used for support requests. Those requests must be directed to your Swyx reseller or distributor.