HOWTO

How to create an MS Info (.nfo) file (kb3643)

The information in this article applies to:

  • SwyxIt! all versions
  • SwyxWare all versions

[ Summary | Information ]


Summary

This article describes how to create an MS Info (.nfo) file which contains detailed information on the installed hard- and software. This file allows to check in the short term if the system concerned meets the hardware recommendations or if any known incompatible software components are installed.

More information regarding hardware recommendations can be found here: 


Information

To create an MS Info file, please proceed as follow:

Click on "Start --> Run --> msinfo32".
Click on OK.

A new window with the System Information will be opened.

Please choose "File --> Save..." and save the System Information as .nfo file.

img-516
Click to enlarge...

MSInfo: save as .nfo
MSInfo: save as .nfo
Click to enlarge...

 

Alternatively, beginning with Swyxware v6.12 the Swyx Trace Tool can be used, which automatically adds an MS Info file to each upload of the trace files.


Comment

Comment on this article



If we have any follow-up questions, where can we contact you?

E-Mail Address (optional)


Note

This feedback form can't be used for support requests. Those requests must be directed to your Swyx reseller or distributor.