INFO

SwyxDect 800 Firmware Upgrade via TFTP Tool Gwload (kb3288)

The information in this article applies to:

  • SwyxDECT 800

[ Summary | Information | Links ]


Summary

This article describes the firmware upgrade via the tool "gwload" and offers the relevant download link.


Information

Usually SwyxDect 800 firmware upgrades are done with a standard browser using the HTTP protocol. This requires a functional firmware on the SwyxDect 800 Base Station. But in case the firmware is broken to any reason, the HTTP upload may not be possible anymore. However, even if the firmware is broken or not present the SwyxDect 800 still runs the boot code. In this case a new firmware can be loaded to SwyxDect 800 by using the tool “gwload”.

To download “gwload” use the following link and read the documentation of “gwload” to ensure the proper operation.

 

gwload /setip /i <ipadress> /gwtype 1201 /prot <..path/firmwarefilename> /go


Links

As far as software supplied or used by us, includes open source elements the additional terms under https://www.swyx.com/open-source apply in addition. An overview which products from the Swyx portfolio include open source elements and which open source license is relevant can be found under https://www.swyx.com/open-source.

The third-party contact information included in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Swyx in no way guarantees the accuracy of this third-party contact information nor is responsible for it's content.


Comment

Comment on this article



If we have any follow-up questions, where can we contact you?

E-Mail Address (optional)


Note

This feedback form can't be used for support requests. Those requests must be directed to your Swyx reseller or distributor.