Configure SwyxWare in Switzerland (kb2756)
The information in this article applies to:
- SwyxWare from version 4
SummaryThis article summarizes how a SwyxWare configuration must be set up in Switzerland regarding the configured phone number fragments.
In Switzerland the subscriber's phone number is composed of the local area prefix and the subscriber number.
Hence following SwyxServer settings have to be applied in the SwyxWare Administration:
|Long Distance Prefix||0|
|Area Code (always)||area specific without leading zero|
Furthermore the long distance prefix plus own area code have to be used even for all outgoing local calls. If a SwyxWare user initiates a call with a canonical dial number (+44 ...), this requirement will be considered by the SwyxServer.