FAQ

Configuration of SwyxPhone Lxxx via HTTP (kb2192)

The information in this article applies to:

  • SwyxPhone L540
  • SwyxPhone L520s
  • SwyxPhone L440
  • SwyxPhone L420

[ Question | Answer | Further Informationen ]


Question

What is the administrator password for SwyxPhone L420 ?


Answer

The password is: 123456


Further Informationen

The SwyxPhone L4xx/L5xx/L6xx can be configured via a common webbrowser. For this one have to connect by http:// to the phone's IP address followed by the portnumber 8085 (i.e. http://192.168.0.123:8085/). The address can be found within the user-menu of the SwyxPhone:
8> Configuration 7> Info 1> IP Adresse

Alternative https:// can be used instead of adding the portnumber (i.e. https://192.168.0.123/).

On the SwyxPhone Lxxx Home Page

SwyxPhone L420 Home Page
SwyxPhone L420 Home Page
Click to enlarge...


you'll find a link to the administrative section and after login
Administrator Login
Administrator Login
Click to enlarge...


you have the following opportunities:

  • configure the administrator settings
  • perform diagnostic tests
  • download new software
  • reset phone configuration to factory defaults

If the phone could not be accessed by webbrowser, please check in the configuration-menu if the buildin webserver is activated:
1> Configuration 4> Phone Administration 2> Web Server


Comment

Comment on this article



If we have any follow-up questions, where can we contact you?

E-Mail Address (optional)


Note

This feedback form can't be used for support requests. Those requests must be directed to your Swyx reseller or distributor.