INFO: Firmware Version 2.1.5 for SwyxDECT 800 base stations released (kb3666)
The information in this article applies to:
- SwyxDECT 800
Firmware Version 2.1.5 for SwyxDECT 800 base stations is released.
The firmware version 2.1.5 doesn't fix any SwyxWare specific defects. It addresses the following problems:
- TPUI (temporary portable User ID) collision in same network
If two DECT handsets have the same ID in the system and if they are connected to the same base station the calls would be lost.
- LDAP synchronization problems
DECT handsets that were registered anonymously doesn't work completely if the system isn't restarted after the registration.
Further information you will find in the article