Swyx Knowledgebase

INFO: SwyxWare v6.02 Maintenance Pack 1 (kb3415)

Watch Article Printversion

The information in this article applies to:

SwyxWare CD v6.02
SwyxWare v6.02

[ Summary | Information | Links ]

Summary

Swyx releases SwyxWare v6.02 Maintenance Pack 1.

Note: when installing v6.02 MP1 in Austria you need to note the following Knowledgebase Article in the Swyx Partner Net. If you do not have access to the Swyx Partner Net contact your Swyx Reseller immediately.

No connection for calls with missing Called Party Number in Austria (kb3499)

To check which version you have currently installed on your system click the "Check for updates" link in SwyxWare Administration or click on the "Product updates" link in the support information of SwyxWare in in the Add/Remove Programs list in Windows control panel.

Please note the common hints on Maintenance Packs in the following Knowledgebase articles:

Information

The Maintenance Pack 1 includes the following components:

SwyxWare v6.02 Maintenance Pack 1
SwyxWare Administration v6.02 Maintenance Pack 1
SwyxIt! v6.02 Maintenance Pack 1
Swyx ISDN SX2 Treiber v6.0.2.28

Please note: in order to setup the Maintenance Pack correctly you need to update all components.

Maintenance Packs of SwyxWare version v5.0 or newer are shipped as patches based on Microsoft Windows Installer, which has a couple of advantages:

No manual replacements of executables necessary
Services are automatically stopped and started
Unique version number to easy see which Maintenance Pack is installed
Maintenance Packs can be easily removed if necessary
Smaller download size

To install the Maintenance Pack execute setup.msp and follow the Installation Wizard.

The Maintenance Pack 1 addresses the following issues:

SwyxServer

Swyx00014589
Wrong CallerID in Voicemail when forwarding a voicemail via remote inquiry.
Swyx00014297
Certain numbers in Germany cannot be reached from Switzerland.
Swyx00014419
Call dialed per overlap sending is routed to trunk although dialed number should be terminated.
Swyx00014903
There is case when it isn't possible to delete user on IFB configuration.
Swyx00015252
It is possible that changes in user configuration will not be notified by the server directly. (DefaultFwd etc.).
Swyx00015447
Trunk enumeration fails if a remotely managed SwyxLink is changed to locally managed.
Swyx00015897
SQL Server (MSDE) causes heavy cpu load.
Swyx00015066
CDSClient maps the same computer name to two differrent IpAddresses.
Swyx00013889
Call transfer with IP600 fails - call disconnect faster than call transfer instruction.
Swyx00015382
Attaching media streaming takes too long in case of PlaySound/ConnectTo script if destination is external party.
Swyx00015427
SwyxServer does sometimes not forward the DTMF infos in case they are sent very early after start of connections.
Swyx00015537
No outgoing T.38 fax calls from innovaphone IP21 possible.
Swyx00015826
Dialing out via overlapped sending failed using a NT mode connection to a subPBX.
Swyx00014199
Privacy header not containing 'id' disturbs correct decoding.
Swyx00014507
Incorrect file name for recorded conversation via SwyxLink.
Swyx00014620
LinkMgr: Access Violation when getting about 300 incoming calls.
Swyx00014941
It is not possible to use the LinkMgr on a remote station.
Swyx00015254
Recording file name is generated with invalid characters if a SIP URI is transmitted as calling party.
Swyx00015343
User hears no Late B3 disconnect tones because LinkManager releases RTP ports.
Swyx00015384
Faxtransmission via INode SIP Trunk is unreliable during transmission of multiple pages.
Swyx00015534
SwyxLinkMgr does sometimes not forward the DTMF infos in case they are sent very early after start of connections.
Swyx00015555
Onesided mediastreaming in case of incoming call from SIP Provider Priority Telecom NL.
Swyx00015780
Incoming SIP call fails via LinkMgr in case of "special" number suppression / RFC3325.
Swyx00015905
LinkMgr: missing CNG T.38 info element in outgoing fax calls.
Swyx00003047
L420-Phone cannot reject first call if you get two calls in the same time.
Swyx00011851
No response to the user, when setting up a callback request using a SwyxPhone.
Swyx00012763
SwyxPhone: you hear the wrong mediastream after a blind call transfer to an external number.
Swyx00014320
PhoneMgr doesn't deliver a group (sequential) call correctly in case of a single user logged on.
Swyx00014901
Mediastreaming is only switched after 10 seconds after a transfer to a swyxphone.
Swyx00014949
Script property 'IsGroupOrUserBusy' delivers wrong result in case number to query is different from called number.
Swyx00015193
One-way media streaming when accepting forwarded call (via drag & drop).
Swyx00015296
PhoneManager dump after disconnecting all phones at once.
Swyx00015533
Line is blocked for 2 seconds after an outgoing call.
Swyx00015892
Impossible to accept 3rd call on SwyxPhone in case of call Signaling.
Swyx00015902
SwyxPhone L520s: The label remain blank after a cold start.
Swyx00014622
Magic strings "*24*2#" and "*24*3#" are not supported.
Swyx00014896
SNMP: SwyxWare performance counters are not visible.
Swyx00015736
SNMP OIDs are not visible to SNMP clients.
Swyx00014926
SwyxGate does sometimes not detect DTMF tones if they are pressed very early after connect.
Swyx00015065
Gateway do not use localhost to address CDS Service, if gateway runs locally.
Swyx00015941
Trunk recording file name contains wrong number in some cases.
Swyx00012278
It's not possible to disable secondary call for SIP devices.
Swyx00012985
Call list entries are not written for ConnectTo devices after a PlaySound action.
Swyx00013895
Missbehaviour in sip-stack, when initiating hold in alerting state (script already connected).
Swyx00013910
Channel counter decrement without prio increment if ip600 hooks off and on.
Swyx00014013
The SwyxPhone has no ringback tone if the callee uses the parallel call feature.
Swyx00014176
SwyxServer AccessViolation after switch-over on passive server.
Swyx00014379
Call stucks if two ConnectTo blocks contain special ALERTING tone.
Swyx00014442
A call to group interrupts if one group member doesn't answer, but second member is busy.
Swyx00014444
After recording new voicemail announcement the RI menu does not proceed.
Swyx00014567
Caller list entry not written for picked-up call.
Swyx00014579
Parallel call fails if parallel call device accepts call very fast.
Swyx00014837
Call deflection does not work if call has been accepted via PlaySound before.
Swyx00014933
Call notifications (SIP invites IPPBXCallType: 5) are sent to CTI-SwyxIt!.
Swyx00014934
Call stucks if ConnectTo with activated Proceed with destination script option connects to user with immediate redirection.
Swyx00014988
Calls starting with magic ## have the wrong external status.
Swyx00015005
Swyxit! display shows unexpected calling party name, when caller initiates a call from remote inquiry script.
Swyx00015006
Secondary call is delivered even if secondary call is disabled and first call is present.
Swyx00015025
Server throws access violation in case of pressing ALT+F4 while active call on SwyxIt.
Swyx00015047
SwyxIt! hangs in connecting state.
Swyx00015078
Server generates minidump every 10min after RI.
Swyx00015113
Sip user passwords should not been traced in plaintext.
Swyx00015199
CDR not written on successfull outbound SIP trunk call because destination address and name are missing.
Swyx00015231
No CallQueue announcement is heared after first connection attempt of trunk call with G.729 only.
Swyx00015242
Call got stuck while COnnectTo loop to group number with announcements between connectTo attempts.
Swyx00015269
Volume of music on hold files is not constant.
Swyx00015325
MEM cannot signal the original callers number to the GSM phone.
Swyx00015346
Incoming SIP calls via SIP links cannot be transferred via script action.
Swyx00015353
Hunt group not working as expected if used with GSE CallQueue.
Swyx00015355
ConnectTo with 'Proceed with destination script' fails if ConnectTo destination is user with immediate redirection to extern.
Swyx00015369
Trunk device channel count not decremented on parallel call if internal device if logged off.
Swyx00015499
Parallel call is canceled on accept with internal device due to codec mismatch if ISDN trunk is configured to G.729 only.
Swyx00015508
SIP Messages are sent from the wrong IP address of FES if Virtuozzo instance has multiple IPs.
Swyx00015540
Call is terminated after ConnectTo script action with unkown number if call was accepted by PlaySound before.
Swyx00015754
Server does not route undeliverable calls to assgined number.
Swyx00015757
Special dialstring for supplementary services not sent to gateway - keypad mode broken.
Swyx00015762
If external number in CDR should be replaced by 'x', it is replaced by 128 'x'.
Swyx00015783
Trunk device channel counter not decremented if parallel call causes two resolutions to trunk device within one ConnectTo.
Swyx00015799
Caller list entry written for wrong user if call is passed through server by number routing entry.
Swyx00015803
Trunk recording: allow ranges for auto numbers.
Swyx00015836
Silence detection causes deadlocks and dumps.
Swyx00015840
Outgoing calls through SIP provider Dus.net are not possible.
Swyx00015883
Status signaling fails when H.323 alias is identical to internal number.
Swyx00015898
SwyxServer uses internal number when client dials user name.
Swyx00015900
Server killed by watchdog when using a lot of phones + CTI.
Swyx00015981
Call deflection works incorrect in case of configured parallel call.
Swyx00016008
Server does not free memory on SwyxIt logon / logoff stress test.
Swyx00016032
One way Conference does not work if initiated via ConnectTo block.
Swyx00016058
Blind Call Transfer Timeout within SwyxServer is too short.
Swyx00014441
It isn't possible to install IFB configuration with IpPbxBackup.

SwyxIt!

Swyx00007013
Rules cannot be reordered in CRM, arrow buttons are disabled.
Swyx00007082
Size of the CRM window is not remembered.
Swyx00009737
Marked CRM rule after GSE cancel.
Swyx00010612
File version tab of callroutingmgr.exe displays language German.
Swyx00012129
The Open dialog don't save path in the Standard Voicemail.
Swyx00012130
The Open dialog don't save path in the CRM.
Swyx00012825
CRM should list custom specific ASE file as "sequence of action".
Swyx00014160
CRM opens the Standard Forwarding properties if to try to activate this rule via checkbox.
Swyx00014843
Call Forwarding Configuration tabs contain old style phonebook buttons.
Swyx00014844
There are some old style buttons on 'Standard Voicemail' tab.
Swyx00014924
Link for set parameter in decription of GSE action.
Swyx00014810
Access violation if intruder holds and actives intrusion call.
Swyx00014835
If SwyxIt is initiator of a conference, the redial button tooltip shows #conference#.
Swyx00015119
Echo when using P250 in headset mode.
Swyx00015122
SwyxIt! does not retry SIP Subscriptions if server is busy.
Swyx00015383
Call will be disconnected if Swyxit! (Prefer compressed) will be holded.
Swyx00015832
Wrong peer number if fake number is configured.
Swyx00015962
SwyxIt! in Powerdial mode should not respond to windows session messages and should not use sound devices.
Swyx00016001
P250 does not work on Vista when 2nd device was installed.
Swyx00012212
Get DTMF string block with empty edit box.
Swyx00012247
Error for disabled edit box.
Swyx00012339
Enabled button after unmarked check box in the "Follow me"action.
Swyx00012343
It is possible to close User List with OK without selected user.
Swyx00012360
It is impossible to add two users in the To field in the "Send email" block.
Swyx00014015
Get DTMF char block doesn't allow using variable to define option "Max detection time".
Swyx00014917
There are some old style buttons in GSE dialog.
Swyx00015970
Wrong timestamps in Outlook Journal.
Swyx00014382
Delete button on keyboard doesn't work for personal phonebook.
Swyx00015318
Blind Call Transfer takes too long because of trailing silence in "NotifyTransferring.wav".

SwyxWare Administration

Swyx00009712
Button "New.." in Call Routing Manager -> Sequens of Actions dialog cannot be pressed in some situation.
Swyx00011946
It should not be possible to configure twin-call at ConnectTo operation which do use 'Proceed with destinations call routing'.
Swyx00012966
IMAP-Passwort can be discovered by hacker tools.
Swyx00013395
Wrong title bar caption in parallel call settings.
Swyx00014566
Loading of standard redirection settings fails for Operator and ConfMgr.
Swyx00009366
GSE background not updated when resized over two monitors.
Swyx00012826
Scripts in user directory are not shown in GSE-Block RunGSEAction.
Swyx00009318
Missing dot in statusbar comment of Action | Connect to another Computer...
Swyx00010204
It´s not possible to click "Check for updates" if scrollbar is used.
Swyx00010416
SwyxWare directory can not be opened in mmc by selecting icon.
Swyx00011238
Email Adress dialog is missing when adding a dummy user.
Swyx00011348
Max calls values can be set to invalid combinations.
Swyx00011530
SwyxWare Administration crashes when SwyxServer is stopped.
Swyx00011902
It is possible to create descending number range for trunk that can't be used then.
Swyx00011975
Add range operation isn't correct.
Swyx00012920
In the New Trunk Wizard -> If first and last subscriber number have different length a strange error message occurs.
Swyx00012939
Next button within Add new number mapping range must be disabled if no internal number is defined.
Swyx00013329
Opening user properties takes too long if SwyxWare has approx. 1000 users.
Swyx00014502
User properties changes are not applied.
Swyx00014777
Not implemented DTMF methods can be configured via SwyxWare Admin for SIP Trunkgroups.
Swyx00015090
SwyxCompact system - Admin counts FaxUser as user which occupies one license.

Swyx SX2 ISDN Driver

Swyx00014553
Drivers shows two DualPRI boards are connected via PCM although they are not.
Swyx00015224
The driver's GUI WAN page displays part of PCM clock settings.
Swyx00015417
Memory leak when running NT and PtP mode.
Swyx00015419
SENDING_COMPLETE is not included in CONNECT_IND message.

Links

SwyxWare v6.02 Maintenance Pack 1 Danish
swyxware_v6.02_maintenance_pack_1_dk.exe
SwyxWare v6.02 Maintenance Pack 1 Dutch
swyxware_v6.02_maintenance_pack_1_nl.exe
SwyxWare v6.02 Maintenance Pack 1 English UK
swyxware_v6.02_maintenance_pack_1_en-GB.exe
SwyxWare v6.02 Maintenance Pack 1 French
swyxware_v6.02_maintenance_pack_1_fr.exe
SwyxWare v6.02 Maintenance Pack 1 German
swyxware_v6.02_maintenance_pack_1_de.exe
SwyxWare v6.02 Maintenance Pack 1 Italian
swyxware_v6.02_maintenance_pack_1_it.exe
SwyxWare v6.02 Maintenance Pack 1 Norwegian
swyxware_v6.02_maintenance_pack_1_no.exe

The third-party contact information included in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Swyx in no way guarantees the accuracy of this third-party contact information nor is responsible for it's content.

Updates

Created: 29.08.2007